Table of Contents
Advertisement
Figure 53. Removing the network daughter card
Installing the network daughter card
Prerequisite
Follow the procedure listed in
Steps
1
Orient the NDC so that the Ethernet connectors fit through the slot in the chassis.
2
Align the captive screws at the back-end of the card with the screw holes on the system board.
3
Press the touch points on the card until the card connector is firmly seated on the system board connector.
4
Using a Phillips #2 screwdriver, tighten the captive screws to secure the NDC to the system board.
Before working inside your system
Installing and removing system components
75
Hide quick links:
Advertisement
Table of Contents
