Front Control Module; Removing The Front Control Module; Installing The Right Control Panel - Dell EMC DSS8440 Installation And Service Manual

Front control module

Removing the front control module

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the following:
a System cover.
b Front bezel
c Butterfly module
Steps
1 Disconnect front control module cable from system board.
2 Loosen the two screws.
3 Lift the front control module from the fan cage.
Figure 69. Removing the front control module
Next step
1 Install the front control module.

Installing the right control panel

Prerequisite
1 Follow the safety guidelines listed in
Steps
1 Install the front control module into the chassis.
2 Secure the front control module using two screws.
Safety instructions.
Before working inside your
Safety instructions.
system.
Installing and removing system components 87