Safety Information - Agilent Technologies PlateLoc User Manual

18 Chapter 1: PlateLoc introduction
PlateLoc User Guide

Safety information

About this topic
Before using the
PlateLoc
Safety standards
Safety labels
This topic provides information for the safe operation of the PlateLoc.
Before using the PlateLoc, your organization should make sure that you
are properly trained in:
General laboratory safety
The correct and safe operation of the PlateLoc
The correct and safe operation of lab automation systems or
components used in combination with the PlateLoc
If you are the person in your organization responsible for training others
on the PlateLoc and you have a safety question, contact Velocity11
Technical Support.
The PlateLoc is CE certified and complies with the following CE safety
directive: EN 61010-1:1993, safety requirements for electrical equipment
for measurement, control, and laboratory use, including amendments 1
and 2.
The PlateLoc is designed to meet UL specifications.
For the latest compliance information, contact Velocity11 Technical
Support.
Pay attention to safety labels on the PlateLoc. A safety label consists of a
warning symbol, a description of the warning, and information that
helps you to avoid the safety hazard.
The following diagram shows the safety label that is placed on the front
of the PlateLoc to warn you of high-temperature hazards.