Sun2000 Handling; Removing The Sun2000; Sun2000 Packing - Huawei SUN2000-30KTL-US User Manual

SUN2000-(25KTL, 30KTL)-US
User Manual

9.1 Removing the SUN2000

This section describes how to remove the SUN2000.
Installed on the Wall or a Common Support
Perform the following operations to remove the SUN2000:
1.
2.
3.
4.
5.
Installed on a Tilted Support
Perform the following operations to remove the SUN2000:
1.
2.
3.
4.
5.
6.

9.2 SUN2000 Packing

This section describes how to pack the SUN2000.

Issue Draft C (2016-01-12)
Power off the SUN2000. For details, see
Disconnect all cables from the SUN2000, including RS485 communications cables, DC
input power cables, AC output power cables, PGND cables, and PV side ground cables.
(Optional) Open the anti-theft lock at the bottom of the SUN2000.
Remove the SUN2000 from the rear panel.
Remove the rear panel.
Power off the SUN2000. For details, see
Disconnect all cables from the SUN2000, including RS485 communications cables, DC
input power cables, AC output power cables, PGND cables, and PV side ground cables.
(Optional) Open the anti-theft lock at the bottom of the SUN2000.
(Optional) Remove the screws at the auxiliary tightening points at the bottom of the
SUN2000.
Remove the SUN2000 from the support.
Remove the tilted support mounting kit.
If the original packing case is available, place the SUN2000 inside the packing case and
seal it with adhesive tape.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

SUN2000 Handling

6.2 Powering Off the
6.2 Powering Off the
9 SUN2000 Handling
SUN2000.
SUN2000.
92