Wall-Mounting The Sun2000; Determining The Installation Position - Huawei SUN2000-30KTL-US User Manual

SUN2000-(25KTL, 30KTL)-US
User Manual
Tool
Torque wrench
Cable tie

4.3 Wall-mounting the SUN2000

4.3.1 Determining the Installation Position

Determine an appropriate position for installing the SUN2000.
Basic Requirements




Installation Environment Requirements



Issue Draft C (2016-01-12)
The SUN2000 is protected to Type 4X and can be installed indoors or outdoors.
The installation method and position must be appropriate for the weight and dimensions
of the SUN2000. For details, see
Do not install the SUN2000 in a place where personnel are likely to come into contact
with its enclosure and heat sinks because these parts are extremely hot during operation.
Do not install the SUN2000 in an area that stores flammable or explosive materials.
An ambient temperature below 50° C (122° F) is recommended to ensure optimal
SUN2000 operation and extend the SUN2000's service life.
The SUN2000 must be installed in a well ventilated environment to ensure good heat
dissipation.
The SUN2000 should be free from direct exposure to sunlight, rain, and snow to extend
its service life. Based on the actual installation environment, the customer can determine
whether to build an awning.
awning (if required).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Model
Open end: 18 mm (0.71
in.), 33 mm (1.30 in.),
and 52 mm (2.05 in.)
N/A
10 Technical Specifications.
Figure 4-2 describes the requirements for building an
4 Installation
Function
Tightens the locking caps and
expansion bolts at the waterproof
cable connectors.
Binds cables.
25