SUN2000-(25KTL, 30KTL)-US
User Manual
Context
Do not install the SUN2000 in a place where personnel are likely to come into contact with its
enclosure and heat sinks. These parts are extremely hot during operation.
4.1 Checking Before Installation
Checking the Outer Packing
Before unpacking the SUN2000, examine the outer packing for damage such as holes and
cracks. If any such damage is found, do not unpack the SUN2000 and contact the dealer
immediately.
Checking the Product and Accessories
After unpacking the SUN2000, check the product and accessories. If any damage is found or
any component is missing, contact the dealer.
Figure 4-1
Issue Draft C (2016-01-12)
Do not install the SUN2000 on flammable building materials.
Do not install the SUN2000 in an area that stores flammable or explosive materials.
Remove the outer packing only 24 hours before installation.
shows the product and accessories included in the delivery.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Installation
4 Installation
18