Huawei SUN2000-30KTL-US User Manual page 69

SUN2000-(25KTL, 30KTL)-US
User Manual
Positive and negative metal terminals are packed with positive and negative connectors
respectively. After unpacking, keep the positive and negative ones separate to avoid
confusion.
Procedure
Step 1 Remove an appropriate length of the insulation layer from the positive and negative power
cables using a wire stripper, as shown in
Figure 5-13 Stripped length
Step 2 Insert the exposed area of the positive and negative power cables into the metal terminals of
the positive and negative connectors respectively and crimp them using a crimping tool, as
shown in
pulled out by a force less than 400 N.
Figure 5-14 Crimping a metal terminal
Step 3 Insert the crimped positive and negative power cables into the corresponding positive and
negative connectors until a click sound is heard.
Issue Draft C (2016-01-12)
Figure 5-14. Ensure that the cables are crimped tightly such that they cannot be
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-13.
5 Electrical Connections
63