Huawei SUN2000-30KTL-US User Manual page 70

SUN2000-(25KTL, 30KTL)-US
User Manual
Figure 5-15 Inserting positive and negative connectors
After inserting the crimped positive and negative power cables into the corresponding
insulation housings, ensure that the cables are in position by checking for resistance when a
slight pull is applied.
Step 4 Tighten the locking nuts on the positive and negative connectors.
Secure the nuts using a removal wrench, as shown in
Figure 5-16 Locking a nut
Step 5 Pull out the blue dustproof plugs from the ends of the DC input connectors.
Issue Draft C (2016-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
Figure 5-16.
64