Handling The Sun2000; Removing The Sun2000; Packing The Sun2000; Disposing Of The Sun2000 - Huawei SUN2000-2KTL-L0 User Manual

SUN2000-(2KTL-5KTL)-L0
User Manual

8.1 Removing the SUN2000

Procedure
Step 1 Power off the system by following the instructions in
Step 2 Disconnect all cables from the SUN2000, including signal cables, DC input power cables, AC
output power cables, and PE cables.
Step 3 Remove the WiFi antenna or 4G module from the SUN2000.
Step 4 Remove the SUN2000 from the mounting bracket.
Step 5 Remove the mounting bracket.
----End

8.2 Packing the SUN2000




8.3 Disposing of the SUN2000

If the SUN2000 service life expires, dispose of it according to the local disposal rules for
electrical equipment and electronic component waste.
Issue 01 (2018-08-30)
8
If the original packaging is available, put the SUN2000 inside it and then seal it using
adhesive tape.
If the original packaging is not available, put the SUN2000 inside a suitable cardboard
box and seal it properly.
Copyright © Huawei Technologies Co., Ltd.

Handling the SUN2000

6.3 Powering Off the
8 Handling the SUN2000
System.
66