Huawei SUN2000-30KTL-US User Manual page 76

SUN2000-(25KTL, 30KTL)-US
User Manual
Issue Draft C (2016-01-12)
d. Route the cable and cable routing pipe through the COM1 and COM2 holes at the
bottom of the SUN2000.
e. Connect the input end to terminals 5 and 7 on the terminal block, and the output end
to terminals 6 and 8 on the terminal block. Connect the shield layer to the ground
point, as shown in
Figure 5-24 Connecting RS485 Communications Cables
f. Bind the communications cables after connecting them, as shown in
Figure 5-25 Binding communications cables
g. Secure the cable routing pipe.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-24.
5 Electrical Connections
Figure 5-25.
70