2.
Connect the power connector to the 24 V
either be of some power adapter or in-house power source.
Figure 2.3 Power Receptor & Button Pin Assignment
3.
Plug the power lines into the system power receptor.
4.
Attach power to the system.
5.
Calibrate the touchscreen.
Note!
If you want to install the touchscreen driver & use the touchscreen utility,
please refer the user manual "PenMount 6000 Installation-Guide" on the
CD-ROM.
TPC-xx51T-x3BE User Manual
Figure 2.2 Power Connector and Power Lines
12
power lines. The power lines can
DC