Initializing The Network Setting - Epson TM-L90-i Technical Reference Manual

Initializing the Network Setting

When network connection fails, follow the steps below to initialize the network setting to the
default.
The TMNet WebConfig password is also initialized.
1
Load the paper on the printer and turn on the printer.
2
Push and hold the push button for 10 seconds or longer.
The following initialization start message is printed.
Use a sharp-pointed object to press the push button.
Do not turn off the power until the initialization is completed.
3
20 to 25 seconds later, the following message is printed, and a status
sheet is printed out.
Chapter 2 Setup
Push button
83
2