Connecting The Power Supply Unit - Epson TM-L90-i Technical Reference Manual

Connecting the Power Supply Unit

Use the TM-L90-i dedicated AC adapter and the AC cable included with the product as the
power supply unit.
 Be sure to use the included AC adapter as the power supply unit.
 Should a fault ever occur in the included AC adapter, immediately turn off the
WARNING
 Be sure to unplug the power supply unit's cable from the wall socket whenever
 Make sure the wall socket power supply satisfies the rated voltage requirements
For more information about how to handle cables, see
Connecting the Power Supply Unit
1
Make sure the power supply for the printer is turned off.
2
Remove the connector cover.
Using a nonstandard power supply can result in electric shock and fire.
power to the printer and unplug the power supply cable from the wall socket.
connecting or disconnecting the power supply unit to the printer.
Failure to do so may result in damage to the power supply unit or the printer.
of the power supply unit. Never insert the power supply cable plug into a socket
that does not meet the rated voltage requirements of the power supply unit.
Doing so may result in damage to both the power supply and the printer.
Chapter 2 Setup
"Handling Cables" on page 101.
2
65