Paper Layout Settings By Dismissing An Error; Clearing Paper Layout Settings - Epson TM-L90-i Technical Reference Manual

Paper layout settings by dismissing an error

If paper is loaded that is different from the set paper layout, a paper layout error occurs. (See
"Recoverable Errors" on page
is used to dismiss the paper layout error, the paper layout will be automatically reset according
to the paper that is loaded.
 In some instances it will not be possible to use this setting if die-cut label paper with
 For more information about memory switch settings, see
 This function is available starting with firmware version 1.05.
1
Open the roll paper cover.
2
Load the roll paper.
For detail, refer to
3
Close the roll paper cover.
The paper is fed automatically, and the new paper layout setting is saved.

Clearing paper layout settings

To delete a paper layout settings that has been saved in the printer and return to the initial
settings (no paper layout set), use the following procedure.
1
Open the roll paper cover.
2
Press the FEED button inside the printer while turning the power on.
Press and hold the FEED button until the ERROR LED comes on.
3
Press the FEED button four times.
4
Close the roll paper cover.
Paper layout settings are initialized.
Once initialization is complete, the printer returns to normal printing status.
94
25) If memory switch 8-2 is set to OFF, and the following procedure
black marks is used. If so, use a command to make the setting manually.
on page 96.
"Installing and Replacing Roll Paper" on page
"Setting the Memory Switches"
131.