Wireless LAN Setting
Follow the steps below to set for wireless LAN (when the optional wireless LAN cable set,
OT-WL01, is used) by using EPSON TMNet WebConfig.
This printer cannot be used with the LAN connection and wireless LAN connection at the
same time. When the printer is set and installed for both of them, only the LAN connection
works.
5
9
6
1
Connect a PC for setting to the network.
2
Connect the TM-L90-i printer to the network, and turn it on.
3
Print a status sheet.
For how to print a status sheet, see
4
Set the PC for setting as the same as the setting printed on the status
sheet.
5
Start up the web browser on the PC for setting, and enter the printer's IP
address printed on the status sheet in the address bar as shown below.
EPSON TMNet WebConfig starts.
74
7
8
"Confirming with a status sheet" on page
http://xxx.xxx.xxx.xxx/PrinterConfigurationPage/
78.