Setting For Connected Devices - Epson TM-L90-i Technical Reference Manual

Setting for Connected Devices

Follow the steps below to set for devices controlled by the TM-L90-i printer by using EPSON
TMNet WebConfig.
 This printer cannot be deleted from a device.
 The "device ID" for this printer can be changed.
4
6
5
1
Start up a PC for setting.
2
Connect all the printers to be controlled to the network, and turn them
on.
3
Print a status sheet for each printer.
For how to print a status sheet, see
4
Start up the web browser on the PC for setting, and enter the TM-L90-i
printer's IP address in the address bar as shown below.
EPSON TMNet WebConfig starts.
5
Select [Configuration], and then [Device].
The [Device Settings] screen appears.
"Confirming with a status sheet" on page
http://xxx.xxx.xxx.xxx/PrinterConfigurationPage/
Chapter 2 Setup
7
78.
2
87