Epson TM-L90-i Technical Reference Manual page 73

1
Connect a PC for setting to the network.
2
Connect the TM-L90-i printer to the network, and turn it on.
3
Print a status sheet.
For how to print a status sheet, see
4
Set the PC for setting as the same as the setting printed on the status
sheet.
5
Start up the web browser on the PC for setting, and enter the printer's IP
address printed on the status sheet in the address bar as shown below.
EPSON TMNet WebConfig starts.
6
Select [Configuration], [Wired], and then [TCP/IP].
The [TCP/IP Setting (Wired)] screen appears.
7
Configure the printer's network setting.
For details, see "TCP/IP Setting (Wired)" on page
8
Click [Submit].
"Confirming with a status sheet" on page
http://xxx.xxx.xxx.xxx/PrinterConfigurationPage/
113.
Chapter 2 Setup
78.
2
73