Epson TM-L90-i Technical Reference Manual page 46

Die-cut Label
Make a margin of 2.8 mm {0.11"} or more from the label edges on both left and right sides and
also a margin of 1.5 mm {0.059"} or more from the label edges on top and bottom of the printable
area of the label (face stock).
Liner width (mm)
Label width (mm)
Printable area (mm)
Left margin (mm)
Right margin (mm)
Total number of dots
2.8 or more
46
80 70 60
76 66 56
70 60 50
2.9 2.9 2.9
3.1 3.1 3.1
560 480 400
Liner width
Label (face stock) width
Printable area
50 45 38
46 41 34
40 35 28
2.9 2.9 2.9
3.1 3.1 3.1
320 280 224
1.5 or more
1.5 or more
2.8 or more
[Units: mm]