Initializing The Network Setting - Epson TM-U220-i Technical Reference Manual

Initializing the Network Setting

When network connection fails, follow the steps below to initialize the network setting to the
default.
Details of initialization
When initialization is performed, the following EPSON TMNet WebConfig setting items are
initialized. For details on EPSON TMNet WebConfig. (U
❏ System Settings - Network - Wired - TCP/IP
The IP address is set to DHCP.
❏ System Settings - Network - Wireless
The wireless LAN connection mode is set to Infrastructure mode, and the SSID is initialized to the
default value.
❏ System Settings - Network - Wireless - TCP/IP
The IP address for the wireless LAN is set to "192.168.192.168".
❏ System Settings - Time - Time
The time server is disabled and the time difference is initialized to the default value.
❏ Admin Settings - Administrator Information - Password
The password required when starting up EPSON TMNet WebConfig is initialized to the default
value.
 EPSON TMNet WebConfig settings other than those listed above are not initialized.
 Files registered to EPSON TMNet WebConfig are saved. (Certificate files, Web contents,
68
PHP, etc.)
"EPSON TMNet WebConfig" on page 97)