Network Settings; Printer Settings; Initializing The Network Setting; Cleaning The Printer - Epson GP-C830 User Manual

Network settings

The information for the network settings, such as the MAC address, IP address, and security settings,
are printed on the status sheet.
1. Make sure that paper is attached to the tractor unit and that the printer is turned on.
2. Press the Tear Off button and Load/Eject button at the same time for three seconds.

Printer settings

The current printer settings are printed on the status sheet.
1. Turn off the printer.
2. Make sure that paper is attached to the tractor unit.
3. While pressing the Cleaning button, press the On button until the On light flashes.

Initializing the Network Setting

When network connection fails, follow the step below to initialize the network setting to the default.
1. Turn off the printer.
2. While pressing the Tear Off button and Load/Eject button, press the On button.
Caution:
!
The initialization takes about 30 seconds. Do not turn off the printer during the initialization.

Cleaning the Printer

To keep your printer operating at its best, you should clean it thoroughly several times a year.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User's Guide
Product Information 103