Network Setting; Wired Lan Setting - Epson TM-L90-i Technical Reference Manual

Network Setting

There are two methods for network settings.
• EPSON TMNet WebConfig: Set from the computer's web browser
• EpsonNet Config: Set from EpsonNet Config, which is first installed on the computer.
The initial value for the IP address is the value acquired via DHCP. If automated acquisition of
an IP address via DHCP fails, set "192.168.192.168" as the IP address. When the printer is turned
on, the IP address is acquired automatically and then printed. The setting method using EPSON
TMNet WebConfig is explained here. For more information about how to use EpsonNet Config,
refer to the EpsonNet Config Operations Guide.
 For more information about how to use EPSON TMNet WebConfig, see
 With either connection, wired LAN or wireless LAN, network setting for both the wired

Wired LAN Setting

Follow the steps below to set for wired LAN by using EPSON TMNet WebConfig.
5
6
72
WebConfig" on page 105.
LAN and wireless LAN is possible.
7
8
"EPSON TMNet