Siemens SIMOTION D4x5 Series Manual page 51

Characteristics
Table 4-3
Characteristic
Connector type
Cable type
Cable type
Maximum cable length
Dust protection filler plugs for
sealing unused DRIVE‑CLiQ ports
DRIVE‑CLiQ pin assignment
Table 4-4
PIN
1
2
3
4
5
6
7
8
A
B
Signal type: I = Input; O = Output; VO = Voltage Output
Additional references
●
●
●
●
●
●
For the order numbers, see the
SIMOTION D4x5
Manual, 04/2014
X100 - X103 (SIMOTION D425, D435) or X100 – X105 (SIMOTION D445/D445-1)
DRIVE‑CLiQ interface (X100 - X103 or X100 – X105)
Signal name Signal type
TXP O
TXN O
RXP I
---- ----
---- ----
RXN I
---- ----
---- ----
+ (24 V) VO
M (0 V) VO
SINAMICS S120 Control Units and Additional System Components Manual
SINAMICS S120 Booksize Power Units Manual
SINAMICS S120 for AC Drives Manual
SINAMICS S120 Commissioning Manual
Terminal Modules TM15 and TM17 High Feature Commissioning Manual
TM15/TM17 High Feature Manual
Type
DRIVE‑CLiQ connector (RJ45 socket)
DRIVE‑CLiQ standard (inside the control cabinet)
MOTION CONNECT (outside the control cabinet)
100 m
5 filler plugs contained in the D4x5 scope of delivery
Filler plugs (50 pcs) order number:
6SL3066-4CA00-0AA0
Meaning
Transmit data +
Transmit data -
Receive data +
Reserved, do not use
Reserved, do not use
Receive data -
Reserved, do not use
Reserved, do not use
Power supply for DRIVE-CLiQ, 450 mA maximum
Ground to 24 V
Overview of SIMOTION documentation (separate document)
Interfaces
4.2 DRIVE-CLiQ interfaces
51