Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BDS RailMAB 960
Summary of Contents for BDS RailMAB 960
- Page 1 Translation of the Original- Operating Instructions RailMAB 960...
-
Page 3: Table Of Contents
This product may not be disposed of in the domestic refuse within the European Union. Dispose of the device via communal collection points. RailMAB 960... -
Page 4: General Instructions
. If the situation is not avoided, it may lead to material damage. ► Follow the instructions in this warning to avoid material damage. NOTE ► A note indicates additional information that simplifies the use of the machine. RailMAB 960... -
Page 5: Safety
Before using, check the machine for ■ Keep the machine clean, dry and free of damage and do not put a damaged oil and grease. machine into operation. ■ Follow the instructions on lubricating and cooling the tool. RailMAB 960... - Page 6 Refuel the machine only when it has been switched off. ► Only handle fuels in a well-ventilated environment. ► Pay attention to the product data sheet of the fuel. ► Pay attention the engine specifica- tions of the manufacturer (12). RailMAB 960...
- Page 7 (12). and before maintenance and cleaning in order to avoid unintentional starting ► Always carry the machine by the of the machine. handle (2). ► Always keep the machine upright. RailMAB 960...
- Page 8 Helmet for protecting your head Symbol Meaning against falling objects Read the operating instructions before beginning work! Wear a safety belt where there is a danger of falling. Wear protective goggles and ear protection! Gloves for protection against injuries RailMAB 960...
-
Page 9: Components/Delivery Contents
Inspect the delivery for completeness Air filter and obvious signs of damage. Report Choke an incomplete or damaged delivery to your supplier/retailer immediately. Tank Fixing screws (rail adapter) Clamping jaw (fast clamping system) Accelerator Ignition switch Fuel tap RailMAB 960... -
Page 10: Preparation
NOTE close proximity to the ground ► In addition to the rail adapters (A) list- ed in the range of accessories, BDS WARNING offers special adapters for special Risk of injury from a falling machine. rails on request. - Page 11 ► Change the rail adapter only when the machine is switched off and at a standstill. Put the machine into a safe condition. ► Change the rail adapter only when the fast clamping system (5) is not tensioned. RailMAB 960...
- Page 12 ► After inserting, check that the tool is engaged securely. Remove the tool from the direct ‹ mounting from the front. ► Only use tools, adapter and accesso- ries that match the machine. RailMAB 960...
- Page 13 SEA 10W-30 (Pay attention to the manufacturer documentation on the engine (12).) ► Absorb excess fuels and lubricants immediately with suitable means. ► Carry out all work on the engine (12) on a firm, flat and level surface. RailMAB 960...
-
Page 14: Use
Release the clamping jaw (18) from ‹ the rail by turning the spindle key (3) NOTE Remove the machine from the rail. ► Pay attention to the manufacturer ‹ documentation when starting and switching off the engine (12). RailMAB 960... - Page 15 (8) and without ■ MAX position exerting too much pressure until the = max. speed (225 rpm) desired core drill is established. ■ MIN position = min. speed (150 rpm) RailMAB 960...
-
Page 16: Eliminating Blockages
Before eliminating a blockage, stop the ► Use the high-pressure container sup- machine completely. plied for cutting oil/drilling emulsion For safe stopping of the engine (12): with BDS 6000 cooling lubricant at the machine. ► Move the accelerator (19) to the MIN position. ►... -
Page 17: Cleaning
Pay attention the engine specifica- tions of the manufacturer (12). ► When using compressed air, wear protective goggles and gloves. ► Protect other persons in the work area. CAUTION ► Never immerse the machine in water or other liquids. RailMAB 960... -
Page 18: Maintenance
WARNING ter-sales service or service, please contact Danger caused by unqualified repairs! BDS. We will be happy to give you the address of your nearest service partner. Unqualified repairs can lead to consid- erable danger for the user and cause damage to the machine. -
Page 19: Storage
(5) does not fix Select and mount a suitable Wrong rail adapter (A) selected. the machine to the rail rail adapter (A). properly. NOTE ► If you cannot resolve the problem with the steps described above, please contact the After-Sales Service. RailMAB 960... - Page 20 Technical Specifications Technical Specifications Model RailMAB 960 Unit Dimensions 535 x 345 x 470 (L x W x H) Net weight approx. 21.5 Cylinder capacity 49.4 Tank capacity Motor power Max. torque 3.04 Nm at 4500 rpm Stroke Core drill (HKK-R) max. Ø...
-
Page 21: Ec Declaration Of Conformity
EC Declaration of Conformity EC Declaration of Conformity Name/address of manufacturer: BDS Maschinen GmbH Martinstraße 108 D-41063 Mönchengladbach We hereby declare that the product Model: Rail core drill with petrol engine RailMAB 960 Type: conforms to the following relevant regulations: ■... - Page 24 BDS Maschinen GmbH Martinstraße 108 D-41063 Mönchengladbach Fon: +49 (0) 2161 / 3546-0 Fax: +49 (0) 2161 / 3546-90 Internet: www.bds-maschinen.de E-mail: info@bds-maschinen.de...