Advertisement
Complete signal
Don't care these values
Save setting or not when exiting
Whether save the settings of operation option
Ignore progress
Don't display the progress if set.
Ignore debug information
Don't display the debug information
Beeper off
Select Beeper On to turn the beeper on or off. The beeper makes a sound to
indicate the results of operations such as Insertion Test error, ID unmatched,
programming successfully completed or failed.
NOTE: Not all programmers include a beeper.
4.5 Edit Auto
The Auto function organizes the different functions of the device into a sequential
group and carries out the functions in order, similar to a batch command. Edit Auto
enables edit functions and operations, in order to automatically execute the
programming procedure according to pre-arranged functions and operations. As can be
seen from the figure above, user can select one certain function/operation and Add,
Delete the selected one, or Delete All to cancel all the previous arrangement.
4.6 Tool Bar
47 / 56
Advertisement
