Advertisement
1. Module number and the ID of the programmer
2. Auto/Cancel button
3. Device name and the manufacturer information
4. Statue bar shows the success/failure of the programmer
5. Statistic information panel
6. Count down settings and information
7. Connectivity and progression of the programmer/project
8. Serial number
3.2 Programming Procedures
This section provides information on steps for common procedures to program devices
using SUPERPRO IS416.
Before using the programmer to program a device, make sure that the programmer is
installed properly and that the computer and programmer are communicating
successfully. Connect the signals with cables according to the device info of IS416.
3.2.1 Hardware preparation
Before operating programmer, please install the software first, and connect programmer
with PC as follows.
17 / 56
Advertisement
