Advertisement
The Blank Check fails on electrically erasable chips containing some
information. In this case, perform the Erase operation first. You do not
need to erase EPROM chips for which the data can be overwritten.
Program
Verify
NOTE: This step is necessary. The chip must pass Verification before the
programming can be implemented. Some chips provide only the
accumulation check function, such as VerifyCRC instead of a
unit-to-unit check function. Very few chips do not provide the
accumulation check function.
Security or Protect if encryption is required
NOTE: You may need to set the configuration word before performing
encryption. Refer to Device Configuration Word on page 37 for more
information. Select Auto to finish all the operations in one step.
Execute Production Mode to Program Chips in Batches
Select Production Mode from the Option menu to program devices in large
quantities. This function facilitates the job of the user who programs chips in
batches. In order to program chips in batches, the programmer always conducts
the insertion test. The programmer waits for the chip insertion to initiate while
the system displays the following prompt: Please, insert a device into the socket.
Once you have properly inserted the chip, the auto batch-processing command
starts automatically.
3.3 Programming When Connected by Hub
Xeltek provides a connection hub and user can simultaneously operate multiple
programmers by using the hub.
Click menu Programmer -> Module Management and select the number of the
programmers you want to operate. Picture below shows the interface when
21 / 56
Advertisement
