Advertisement
4 After select project, then to set IO state of "START", and remain high level above
200ms to 500ms, IS416 will be triggered to start work. The IO state of "BUSY" will be
high. States of "PASS" and "FAIL" will be low.
5 After completion of operation, the IO state of "BUSY" will be low to indicate work
over, and one of "PASS" or "FAIL" will be high to indicate result.
6 And then may go to step4 in loop to work continually or go to step3 to select another
project to work, or break.
Chapter 4 Functions and Commands
This chapter provides a detailed specification and explanation of the
SUPERPRO
IS416
®
software. It includes the description of the functions and commands that is listed as
below,
•
File Menu and Tool Bar (4.1)
•
Project Menu (4.2)
•
Device Menu (4.3)
•
Option Menu (4.4)
•
Tool Bar (4.5)
•
Log History Window (4.6)
4.1 File Menu and Tool Bar
The File menu provides access to the commands of Load, Save, Recent Projects, and
Exit. Each function is described in the following sections.
4.1.1 Load File
There may be one or more data buffers in the device. If several data buffers are
displayed after you have selected the device, refer to the name and the data manual
for the meanings of the buffers. The two data types of the device are Data
(HEX/ASCII) and Fuse.
•
For most EPROM and SCM, the data type is Data (HEX/ASCII).
•
The data type for PLD device is Fuse.
27 / 56
Advertisement
