Advertisement
simultaneously operating four programmers.
Every programmer has a unique number. The programmer's first line of the LCD
display will show the number of this programmer. The module that is selected at the
time will be highlighted. The device that is going to be programmed can be different
type(s) in each of the module that is connected through the hub.
In normal mode, all operations (i.e. selecting devices, loading documents and
programming) are carried out in the programmer that is selected and
highlighted at the time being.
In global configuration mode, all the operations are carried out in the
programmer(s) that is selected with the check in tick-box(es).
NOTE: Choose specified hub for XELTEK to connect programmer, and
currently up to 8 programmers can be operated simultaneously.
3.4 Introduction of Interface and Channel of programmer
Instruction of IS416's Channel
22 / 56
Advertisement
