Instruction For Using The Colposcope - Labomed PRIMA GN User Manual

INSTRUCTIONS FOR USING THE COLPOSCOPE
WARNING:
Setting up of Colposcope:
1 Lock all the brakes on base wheels after
setting up of microscope on the attendance
area for stability.
2 Although tension on microscope is factory
preset as per the ordered configuration. Still
user can adjust up and down force by
tuning the allen screw clockwise or
anticlockwise with the help of a 8.0 mm
allen wrench.
Refer Fig. 12 to see the exact location of
tension adjusting screw.
3 Lock the Up & Down movement of
suspension arm using locking knob(B) in
fig. 12 after coarse focusing of the
attendance area.
4 Adjust the eye distance as per IPD scale
according to your convenience.
5 The illumination is controlled through the
control knob (A), fig. 12. Rotate it clockwise
or anti clock wise to achieve desired
illumination level Functional setup keep it as
minimum.
Setting up of magnification (Ref. Fig. 13)
1 Adjust to highest magnification with one of
the rotating knobs (11a) provided at
magnification changer.
2 Fine focusing is done by knob provided on
CMO shown as (11d) in fig. 13
3 Absolute centering of observation area in
field of view can be done by manual
handle(11c).
4 Make sure that the magnification changer is
engaged in the index point at the click stop
position.
6165000-795
INSTRUMENT IS UNSAFE FOR MRI ENVIRONMENTS
A
11d
PRIMA GN
Prima GN
B
Tension
adjustment screw
Fig. 12
11a
11c
Fig. 13
Issue 1.4
Printed on March, 2016