Con@Ctivity - Miele KM 6360 Operating And Installation Instructions

Con@ctivity

Your cooktop is communication en-
abled and can communicate with the
ventilation hood using the wireless USB
stick included with selected ventilation
hoods (Con@ctivity). The cooktop
sends information on its operating sta-
tus to the ventilation hood. The opera-
tion of the ventilation hood is automati-
cally controlled by the power setting of
the connected cooktop.
If you want to log your cooktop onto
Con@ctivity, you must first log on to
the ventilation hood.
Logging on the cooktop
 When the cooking zone is turned
off, tap the  and  sensor buttons
simultaneously until the indicator light
for the safety lock flashes.
In the timer display,  (program) and 
(status) appear. The program number
will be displayed to the left of the con-
trol scales and the set status to the
right.
 Tap sensor button 1 on the rear left
control scale (set program 10).
 Tap sensor button 2 on the right
front control scale (set Status 2 =
log-on).
The log-on procedure starts and sensor
button 2 flashes on the right front of the
control scale. The log-on procedure will
take a few minutes. Sensor button 2
lights up constantly as soon as the pro-
cedure has been completed success-
fully.
 To save the setting, tap the  sensor
button until the indicators go out.
52
 Conclude the log-on on the hood/dis-
play devices (see the corresponding
instructions).
Logging off the cooktop
 When the cooking zone is turned
off, tap the  and  sensor buttons
simultaneously until the indicator light
for the safety lock flashes.
In the timer display,  (program) and 
(status) appear. The program number
will be displayed to the left of the con-
trol scales and the set status to the
right.
 Tap sensor button 1 on the rear left
control scale (set program 10).
 Tap sensor button 1 on the right
front control scale (set Status 1 =
log-off).
The log-off procedure starts and sensor
button 1 flashes on the right front of the
control scale. The log-off procedure will
take a few minutes. Sensor button 1
lights up constantly as soon as the pro-
cedure has been completed success-
fully.
 To save the setting, tap the  sensor
button until the indicators go out.