Dean MF90 Series Installation & Operation Manual page 2

Please read all sections of this manual and retain for future reference.
Installation, maintenance, and repairs should be performed by your Frymaster/Dean
Safe and satisfactory operation of your equipment depends on its proper installation.
Installation MUST conform to local codes, or in the absence of local codes, with the
latest edition of the National Electric Code, N.F.P.A. 70.
This filter is equipped with a three-prong, grounded plug for your protection against
shock hazard and should be plugged directly into a properly grounded, three-hole
receptacle. Do not cut off, remove or otherwise bypass the grounding prong on this
If it is necessary to use an extension cord, it MUST be a three-conductor, grounded
Hot fluid – Do not fill above a point 1-½ inches below the OIL CONTAINER RIM.
This filter unit is not suitable for outdoor use. When operating this unit, it MUST be
This filter unit is not suitable for installation in an area where a water jet can be used,
and this appliance MUST NOT be cleaned with a water jet.
Authorized Service Agency.
ELECTRICAL GROUNDING INSTRUCTIONS
cord of 16 gauge or greater.
Do not filter more than one fry tank at a time.
placed on a horizontal surface.
WARNING
WARNING
plug.
DANGER
WARNING
WARNING