Table of Contents
Advertisement
LeCroy Corporation
CrossSync-Capable Products
The following products support CrossSync operation:
TABLE 1.1: LeCroy Protocol Suites and Products
Required Software
USB Protocol Suite 4.20 and later
SAS/SATA Protocol Suite 4.00 and later
FC Protocol Suite 3.25 and later
PETracer 6.50 and later
DDR Protocol Suite 1.01
IOTA Software Suite 1.00
LeCroy will add support for more protocol analysis products in the future.
Overview of the CrossSync Hardware
The CrossSync capability requires that analyzers are connected using their Sync ports.
CrossSync can be used with the built‐in Sync port included on every Advisor T3 and Sierra
M6‐1 analyzer. For owners of LeCroy's Sierra, Summit T3, and Voyager M3i based
analyzers, the CATC Sync port requires the optional expansion board (ACC‐EXP‐002‐X).
There may be additional configurations added in the future for platforms that can
support the CATC Sync framework.
Overview of the CrossSync Software
The CrossSync control panel requires updated analyzer software that supports the new
CrossSync framework. The CrossSync control panel does not have a separate installer,
instead it is embedded in the Protocol Suite installers. The solution includes a lightweight
software control panel that starts and stops recording across daisy‐chained analyzers.
Users can sync or un‐sync traces on‐the‐fly. The Time Tune feature provides an interactive
slider for adjusting the off‐set between displays. This makes it easy to see latency across
busses.
Note:
If the system prompts you that it cannot write a trace file to disk:
1. Make sure that the trace‐file destination folder has write/create permissions. (For
example, the target directory might be the network file system, which typically does not
have write/create permissions.)
2. Make sure that the Windows (or other) Firewall Settings for all LeCroy applications are
set to Public.
2
CrossSync‐Capable Products
Product
USB Voyager M3i
USB Advisor T3
SAS/SATA Sierra M6‐4
SAS/SATA Sierra M6‐2
SAS/SATA Sierra M6‐1
SierraFC M8‐4
PCIe Summit T28
PCIe Summit T3‐16
PCIe Summit T3‐8
Kibra 380 DDR3
N/A
CrossSync User Manual
Advertisement
Table of Contents
