CrossSync Control Panel
Time Tune Tab
The Time Tune tab provides an interactive slider for adjusting the offset between displays.
The Source is the time reference point for the Target. The Target time‐sync is offset by
Delta relative to the Source. The Time Tune tab displays the following:
Figure 3.5: Time Tune Tab
General Tab
The General tab allows you set the general settings. Select the check‐box to show the
information balloon popups in the Windows System Notification Tray.
Figure 3.6: General Tab
CrossSync User Manual
Source ‐ Double‐click on the icon to switch the Source.
Target ‐ Displays the target.
Delta ‐ Enter a value or slide the tuner to select the offset.
Time Type ‐ Select a value in seconds, milliseconds, microseconds or nanosec‐
onds from the drop‐down list.
LeCroy Corporation
19