Topology View - LeCroy CrossSync User Manual

LeCroy Corporation
TABLE 3.4: CrossSync Devices: Device List Tab Column Descriptions
Columns
Item number
Sel.
Device
Protocol Suite
Record Setting
Location
Ports
Status

Topology View

Once the analyzers have been set, the Topology View provides a visual layout of all the
devices attached to the CrossSync control panel.
Figure 3.11: Topology View
24
Description
Numeric list of device.
Device Selection checkbox. Check the box to include
the device in the recording session. Uncheck the box
to exclude the device from the recording session.
Device Name and Serial Number.
Icon of the Protocol Suite of the device being used is
displayed.
Click to invoke the settings dialog for that device in
its respective protocol application.
Location of the device (local or on the network)
Identifies ports P1, P2, P3, and P4. A
indicates an Analyzer is connected. A
indicates the port is not being used.
Indicates the status of the device. They are:
Ready ‐ Device is ready to begin a session.
Working ‐ Device is currently in a session.
Ready to connect ‐ Device is on the network and
available for connection.
Locked by <user> ‐ Device is on the network but in
use by <user>.
Not working properly ‐ Device may require a BE/FW
update.
CrossSync Control Panel
icon
icon
CrossSync User Manual