Main Buttons - LeCroy CrossSync User Manual

CrossSync Control Panel

Main Buttons

The main icons are explained in the following table.
TABLE 3.3: Main Icons and Descriptions
Icons
Open File
Break Sync.
Trace Files
Select
Application
Devices
Settings
Record
CrossSync User Manual
Descriptions and Submenus
The Open File icon opens a set of synchronized traces from a
previous session. This is a dual‐mode button; clicking on the down
arrow displays the following menu:
Zip Most Recent Traces

Open Traces Folder in Windows Explorer

The Break Sync. Trace Files icon toggles the view synchronization
between traces.
The Select Application icon allows you to select the application suite
you would like to run. This is a dual‐mode button; clicking on the
down arrow displays the following menu:
FC Protocol Suite

PETracer

SAS Protocol Suite

SATA Protocol Suite

USB Protocol Suite

DDR Protocol Suite

IOTA Protocol Suite

The Devices icon opens the Devices dialog. This is a dual‐mode
button; clicking on the down arrow displays the following menu:
The selected Device Name and Serial Number

Refresh

The Settings icon opens the LeCroy CrossSync ‐ Settings dialog. There
are four tabs: Applications, Trace File, Time Tune and General where
the application settings can be selected.
The Record icon starts a synchronized session.
LeCroy Corporation
21