6 Connection and Wiring
6.4.3
CR3D Controller
Ferrite core
(attachment)
(*1)
Position where the cable is clamped
for grounding purpose
Strip off some sheath of the cable and
keep metal blade portion in contact
with the controller casing.
(*2)
When Siemens PROFIBUS FC standard cable (8.0mm O.D.) is used, recommended metal clamps are:
AL4 or AL6 *RICHCO INC
About Noise Control 6- 28
R700 CPU unit
*2
30cm or less
Figure 6-10 Installing PROFIBUS Cable (CR3D Controller)
PROFIBUS cable
(to be furnish by the user)
Position where the cable is clamped for
grounding purpose
(earth clamp available as an attachment to
*1
the casing)
Sheath
20 to 30mm
Metal blade
portion
AL4: D = 6.4mm (1/4 in.)
AL6: D = 9.5mm (3/8 in.)
Sheath