6.5 Checking Connections
Before placing the 2D-TZ577 Card in service, go through the following checklist to avoid oversights.
No.
1
Is the 2D-TZ577 Card securely installed into the Controller's slot?
Is the RPOFIBUS Cable linking the 2D-TZ577 Card to the user's
2
external equipment properly connected?
Is the special-purpose connector installed at each end of the
3
PROFIBUS network configured to apply terminal resistance as
specified?
4
Is the ferrite core is installed in place?
Table 6-2 Checklist for Proper Connections
Item confirmed
6 Connection and Wiring
Check
Checking Connections 6- 29