Description
2.1
General
Overview
This manual describes the differences in the operation of the ET 200S FC (FC = Frequency
Converter) in the SIMOTION system compared with operation in the SIMATIC system.
Note
This manual is a supplement to the SIMATIC
Instructions (03/2005 Edition).
This documentation is supplied with the SIMOTION SCOUT in electronic form!
Requirements
The following are required for the standard function described in this document:
● SIMOTION SCOUT, V4.1 SP1 or higher
● SIMOTION Kernel, V4.1 SP1 or higher
● ET 200S frequency converter with ICU24, software release V1.02 or higher
Note
The functions associated with the _ET200S_FC_control function block can only be used on
the ET 200S frequency converter with ICU (Article No: 6SL3244-0SA00-1AA0).
2.2
Product description
ET 200S frequency converter
The ET 200S FC is a modular frequency converter that is completely embedded in the
distributed I/O system of the ET 200S.
During generator operation of the connected motor, the ET 200S FC feeds back energy into
the supply system.
Supplement for the ET 200S frequency converter
Function Manual, 01/2015
ET 200S FC Frequency Converter Operating
2
9