Siemens SIMATIC ET 200S Function Manual page 35

Simotion supplement for the frequency converter

Hide thumbs Also See for SIMATIC ET 200S:

Table of Contents

For a more detailed description, refer to the section titled "Diagnostics and monitoring

functions" in the SIMATIC

Edition).

Responses to a diagnostic alarm

If a diagnostic alarm is issued, the following occurs:

1. The group error LED (SF) lights up on the ET 200S frequency converter.

2. Diagnostic data is written to the TSI#details variable in the Taskstartinfo of

PeripheralFaultTask. The program assigned to the PeripheralFaultTask is executed.

3. The SIMOTION device goes into STOP mode if a program has not been assigned to the

PeripheralFaultTask.

4. The group error LED (SF) goes out as soon as the error has been remedied.

Bit assignment

The TS#details variable is assigned in the same way as in a SIMATIC system.

Note

For a more detailed description, refer to the section titled "Diagnostics and monitoring

functions" in the SIMATIC

Edition).

Supplement for the ET 200S frequency converter

Function Manual, 01/2015

ET 200S FC Frequency Converter Operating Instructions (03/2005

Alarm processing

6.2 Diagnostic alarms

Table of Contents