Tektronix AWG7000 Series Technical Reference page 21

Table 1-6: Analog output (standard) (Cont.)
Characteristics
n Harmonic distortion
AWG710x Normal mode
AWG710x Direct D/A mode
AWG705x Normal mode
AWG705x Direct D/A mode
n Non harmonic spurious
AWG7101 and AWG7102
AWG7051 and AWG7052
SFDR, typical
AWG7101 and AWG7102
AWG7051 and AWG7052
n Phase noise
AWG7101 and AWG7102
AWG7051 and AWG7052
Random jitter on clock pattern,
typical
Normal mode
Direct D/A mode
Total jitter on random pattern,
typical
Normal mode
Direct D/A mode
AWG7000 Series Arbitrary Waveform Generators Technical Reference
Description
Amplitude=1.0 Vp-p, offset=0 V, DAC resolution =8 bit, measured with 32 points sine waveform
<- - 35 dBc, when clock=10 GS/s, signal=312.5 MHz
<- - 42 dBc, when clock=10 GS/s, signal=312.5 MHz
<- - 40 dBc, when clock=5 GS/s, signal=156 MHz
<- - 45 dBc, when clock=5 GS/s, signal=156 MHz
Amplitude=1.0 Vp-p, offset=0 V, measured with 32 points sine waveform
<- - 50 dBc, DC to 5 GHz, when clock=10 GS/s, signal=312.5 MHz
<- - 50 dBc, DC to 2.5 GHz, when clock=5 GS/s, signal=156 MHz
Normal output mode, amplitude=1.0 Vp-p, offset=0 V, DAC resolution =10 bits
45 dB, when clock=10 GS/s, signal=312.5 MHz
51 dBc, when clock=5 GS/s, signal=156 MHz
Normal output mode, amplitude=1.0 Vp-p, offset=0 V, DAC resolution =8 bits
<- - 90 dBc/Hz at 10 kHz offset, when clock=10 GS/s, signal=312.5 MHz
<- - 90 dBc/Hz at 10 kHz offset, when clock=5 GS/s, signal=156 MHz
By 0101... clock pattern, amplitude=1.0 Vp-p, offset=0 V
1.6 ps
0.9 ps
PN15 pattern, amplitude=1.0 Vp-p, offset=0 V, measured at bit error rate=1e- - 12
50 ps p-p at 500 MS/s
30 ps p-p from 1 GS/s to 6 GS/s
Specifications
1-5