USB 598 USB - User Guide
36
Locking the modem
Note: If you forget the lock code, you will not be able to use the
modem until you receive assistance from your service provider.
To lock the modem:
1.
End any active connection. (You can lock the modem only
when it is disconnected; page
Extras
2.
From the
item on the Watcher menu, choose
Device
.
3.
In the Watcher window, enter the lock code (PIN), and
Ok
click
.
When the modem is locked, Watcher displays "Device is
Connect
Locked." The
button is unavailable.
Unlocking the modem
When the modem is locked, Watcher displays "Device is
Locked."
To unlock the modem:
Extras
1.
From the
item on the Watcher menu, choose
... Device
.
2.
In the Watcher window, enter the lock code (PIN), and
Ok
click
.
If you can't recall your lock code, try using the last four
digits of your modem's phone number. If this doesn't work,
call your service provider.
When the modem is unlocked, Watcher no longer displays
"Device is Locked."
Powering the modem off
If you are using your modem in an aircraft, hospital, or other
environment where the modem may cause interference, you
can power the modem off (without removing it from your USB
slot), and still use other functions of your computer.
This also allows you to conserve your notebook computer's
battery.
To power the modem off:
1.
If the modem is locked, unlock it.
2.
Close any active data connection (in Watcher, click
Disconnect
).
29.)
Lock ...
Unlock
2131141