Table of Contents
Advertisement
Compass 597 USB modem - User Guide
46
Initial lock code
The initial lock code value is determined by your service
provider.
For service provider configurations that do not require account
activation, a default lock code is set at the factory to a value
determined by the service provider. For assistance, contact
your service provider.
Configurations that use the Activation Assistant or automated
activation set the initial lock code to the last four digits of your
account phone number whenever a new phone number is
activated.
Note: The security lock code is reset to the last four digits of the
phone number whenever an account is activated.
Warning regarding the lock code
If you lock the modem and forget the lock code, you will not
be able to use the modem until you receive assistance from
your service provider.
When the modem is locked
When the modem is locked, you can:
•
Unlock the modem (page
•
Power off the modem (page
When the modem is locked, you cannot:
•
Make data connections (the
•
Run the Activation Assistant.
Locking the modem
Note: If you forget the lock code, you will not be able to use the
modem until you receive assistance from your service provider.
To lock the modem:
1.
End any active connection. (You can lock the modem only
when it is disconnected; page
Extras
2.
From the
item on the Sierra Wireless Watcher menu,
Lock Device
choose
.
3.
In the "Lock Device" window, enter the lock code (PIN),
OK
and click
.
47).
47).
Connect
button is unavailable).
43.)
2130972
Advertisement
Table of Contents
Troubleshooting
