Table of Contents
Advertisement
Document 2131141. Rev 1.0 Feb.09
Activation Assistant
If your device is not activated, use the Activation Assistant:
Extras
1.
From the
item on the Watcher menu, choose
Activation
.
The Activation Assistant window is displayed.
2.
Phone your service provider. Inform them that you are
activating a Sierra Wireless wireless device.
3.
Follow the instructions of your service provider to activate
your device. Write down this information that your service
provider gives you (depending on your service provider,
some of the following items may not apply):
Activation code (MSL): ____________________________
USB 598 phone number (MDN):
MIN / IMSI_S (if not the same value as your MDN [above]):
MSID: _____________________________________________
4.
To complete the activation process, enter the information
(that you wrote down) into the fields on the screen, and
Activate
click
.
5.
Go through the rest of the Activation Assistant.
After your service provider sets up your account on the
network, your device is activated.
6.
If a window appears, prompting you to enter your
password, enter your Mac password, then click
7.
If the New Port Configuration window appears, click
Continue
to automatically configure your computer to use
your device.
8.
Proceed to "Watcher window" on page 28.
Activation
_____________________________
_____________________________
OK
.
25
Advertisement
Table of Contents
