Monitor And Control; Modem Doctor; Connecting To Your Cellular Provider - Sierra Wireless AirLink Raven XT User Manual

Introduction to the Raven XT

Monitor and Control

ACEmanager allows an administrator to remotely monitor a modem's status,
health and configuration settings. The user interface displays signal strength, cell
site information, byte counters and error conditions, enabling you to pinpoint any
issues and troubleshoot immediately.
ACEmanager enables remote configuration and parameter settings to be
changed or reset instantly over the air, change a device's port configuration, IP
address settings, GPS settings, and much more. After configuring one modem,
use the template feature to copy that device configuration to other devices.
Tip: Configuration steps and examples in this guide use ACEmanager.
ACEview is an efficient status and connection monitoring application with a low-
profile, easy to read interface. In ACEview, you can also update PRL.

Modem Doctor

Modem Doctor and Modem Doctor USB is a troubleshooting and diagnostics
utility. This utility will allow you to get a log file of the Raven XT activity which you
can then send to Sierra Wireless support or erase the current configuration
completely.
Figure 1-4: Modem Doctor

Connecting to your cellular provider

The Raven XT uses your cellular provider as an ISP (Internet Service Provider) to
connect you to the Internet.
Rev 1.0 May.10 3