Table of Contents
Advertisement
4: Activation
•
Account configuration
procedures
Document 2131141. Rev 1.0 Feb.09
Account configuration
procedures
The final step to making the modem operational is configuring
it to use your CDMA service provider account. The process of
activation configures your modem with the required account
parameters (phone number, username, password, and so on).
If you purchased a pre‐activated modem, this step is not
necessary. Once the application software and drivers are
installed, the modem is ready for use. Proceed to "Watcher
Basics" on page 27.
Otherwise, you must either allow Watcher to complete the
activation process or use the Activation Assistant to activate
and configure your account.
Activating on a Mac computer
After your computer has restarted:
1.
Run Watcher: in Finder™, choose
Sierra Wireless Watcher
, and then double‐click
Watcher should start.
2.
If the New Port Detected window appears, click
3.
If a window appears, prompting you to enter your
password, enter your Mac password, and then click
Watcher displays a status message or an "Alert" window.
Go > Applications >
Watcher
.
Continue
.
OK
.
23
4
Advertisement
Table of Contents
