Step 1-C: Mount Nmo Outside Antenna - weBoost Drive Reach Fleet Installation Manual

______
Step 1-C: Mount NMO
Outside Antenna
Before attaching the antenna, apply a thin layer of silicone
grease only onto the threads of the NMO mount and onto
the o-ring on the antenna. Screw the antenna onto the NMO
mount and hand tighten into place.
NOTE: DO NOT apply silicone grease to the antenna pin contact surface.
apply silicone grease
DRIVE REACH FLEET PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT
screw on
NMO Antenna
hand tighten and make sure
gasket is touching vehicle
surface
5