Related Manuals for weBoost 460066
Summary of Contents for weBoost 460066
- Page 1 Installation Guide A WILSON ELECTRONICS BRAND Home Studio / Home Studio Lite Cell Signal Booster...
-
Page 2: Table Of Contents
Index Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 STEP 1 Attach Booster Antenna to Booster &... -
Page 3: Package Contents
Package Contents Home Studio/Home 2-30 ft . Outside Antenna & Power Studio Lite Booster Cables L-Bracket Antenna Supply & Booster Antenna Mount... -
Page 4: Step 1 Attach Booster Antenna To Booster & Place In Desired Location
STEP 1 Attach Booster Antenna to Booster & Place In Booster Desired Location Antenna Attach the Booster Antenna to Home Home Studio/Home Studio/Home Studio Lite Booster and Studio Lite booster place in room where stronger cell signal is needed . STEP 2 Mount &... - Page 5 (STEP 2 cont .) Point the Outside Antenna toward the nearest cell phone tower . To find the nearest tower, use an app such as ‘Open Signal’ . This is the most critical step of the installation process because it will determine the overall performance of the Booster System .
-
Page 6: Step 3 Route & Connect Outside Antenna To Booster
STEP 3 Route & Connect Outside Antenna To Booster Connect the white RG-6 Cable to Outside Antenna and route and connect cable to Home Studio/Home Studio Lite Booster . All connections should be finger tightened only . STEP 4 Power Up The Booster Status Lights will &... - Page 7 (STEP 4 cont .) After powering up your system, check to see how your talk, text, and data rates have improved . If more is desired, you can optimize your system . After each rotation, observe Rotate the Outside Antenna in 1/8 turn signal level on your cell phone increments, after each turn, unplug and from the Inside Antenna’s...
-
Page 8: Status Light Patterns
Status Light Patterns Home Studio Booster Lights GREEN This indicates that your Home Studio or Home Studio Lite Booster is functioning properly and there are no issues with installation . SOLID RED Band has shutoff . This is due to a feedback loop condition called oscillation . - Page 9 (Status Light Patterns cont .) already experiencing the desired signal boost, then no further adjustments are necessary . If you are not experiencing the desired boost in coverage then refer to the Troubleshooting section . BLINKING GREEN, YELLOW This indicates Band has reduced gain . This indicates that one or more of the Booster bands has reduced power due to overload from nearby cell tower .
-
Page 10: Troubleshooting
Troubleshooting FIXING RED LIGHT ISSUES This involves Solid Red & Blinking Green/Red lights. ■ Tighten all cable connections (be sure to handtighten only, do NOT use tools) . You may want to undo and redo the connection completely . Unplug and replug in Power Supply . -
Page 11: Safety Guidelines
Safety Guidelines Verify that both the Outside Antenna and the adapter extension cable are connected to the Signal Amplifier before powering up the Signal Amplifier . Use only the Power Supply provided in this package . Use of an incorrect Power Supply may damage your equipment . - Page 12 (Safety Guidelines cont .) FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR WIRELESS PROVIDER, PLEASE SEE BELOW: T-Mobile/Sprint/MetroPCS: https://www . t -mobile .com/support/coverage/register-a-signal-booster Verizon Wireless: http://www . v erizonwireless .com/wcms/consumer/register-signal-booster .html AT&T: https://securec45 .securewebsession .com/attsignalbooster .com/ U.S. Cellular: http://www .uscellular .com/uscellular/support/fcc-booster-registration .jsp...
- Page 13 Antenna Info The following accessories are certified by the FCC to be used with the Home Studio or Home Studio Lite Cell Signal Boosters . HOME STUDIO BAND 2 BAND 4 BAND 5 BAND 12 BAND 13 Outside antenna maximum permissible 6 .
-
Page 14: Specifications
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to... - Page 15 This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to...
- Page 16 Notes 866 .294 . 1 660 www .weboost .com support@weboost .com...
- Page 17 Notes 866 .294 . 1 660 www .weboost .com support@weboost .com...
- Page 18 Notes 866 .294 . 1 660 www .weboost .com support@weboost .com...
-
Page 19: Warranty
DISCLAIMER: The information provided by weBoost is believed to be complete and accurate . However, no responsibility is assumed by weBoost for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use . - Page 20 866 .294 . 1 660 www .weboost .com support .weboost .com Copyright © 2020 weBoost . All rights reserved . weBoost products covered by U .S . patent(s) and pending application(s) For patents go to: weboost .com/us/patents GDE000364_001_11 .30 .20...