Ecurity; Password Enabled; Password Change; F Actory D Efaults - heat-timer Multi-MOD Platinum Installation And Operation Manual

SeCuRITY
• The Password is used to prevent unauthorized users from making
changes to the Multi-MOD .
• Enabling up the Password is not recommended as it slows down
access, makes servicing more difficult, and can disable the system if
management or ownership should change .

PASSWORD eNABleD

Yes, No
PReSS TO SeleCT: /<Maintenance>/Password
• When the Password is enabled, none of the settings can be changed
without entering the Password .
• Once the Password is entered, you can make multiple changes . The
Password expires 5 minutes after the last change is made .
• The default Multi-MOD Platinum Password is
• At the Login screen, you will have to enter the Password . Turn the Adjust
knob until the desired letter is shown . Then, press the Adjust button to
move on to the next letter .

PASSWORD CHANGe

Yes, No
PReSS TO SeleCT: /<Maintenance>/Password/Change Password?
• Follow the instructions to use the default Password, but select Yes when
prompted to change the Password?
• Enter your new Password in the New Password screen . Turn the Adjust
knob until the desired letter is shown . Then press the Adjust button to
move on to the next letter . The password must consist of 4 letters .
• To confirm the password, it must be re-entered when prompted .
ReSeT CONTROl TO FACTORY DeFAulTS
• To reset the control to factory defaults, turn off the control power . Then
re-power the control back .
• During the count down, hold down the Adjust and Next buttons until the
"Total Clear Started" message displays .
48
Multi-MOD Platinum with Space and Scheduling Installation and Operation Manual
Default: No
.
MMOD
Default: No
PASSWORD ENABLED?
NO
YES
------- LOGIN -------
ENTER PASSWORD
M***
CHANGE PASSWORD?
NO
YES
-- NEW PASSWORD --
ENTER NEW PASSWORD
****
-- NEW PASSWORD --
REENTER NEW PASSWORD
****
AleRT
If the Password was enabled .
Make sure to write it down
and store it in a safe location
known to at least one
additional authorized user .
WARNING
If total reset was performed, all
saved settings including any
custom control password will
be lost .
TOTAL CLEAR STARTED
Release buttons
and
Please wait