Specifications - DENTSPLY DeTrey SmartLite PS Manual

SmartLite™ PS
12

Specifications

AC Supply connection:
Power input:
Protection from ingress of liquids:
Operation:
Storage:
Transport:
Battery performance:
Battery over current protection
Battery life
Light emitting diode:
Output peak wavelength range:
Unit hand piece dimensions:
Tip dimensions:
Unit weight:
Hand piece and tip
Charger
1
According EN 60601
90...110 V~ 50...60 Hz 2.5W
110...130 V~ 50...60 Hz 2.5 W
220...240 V~ 50...60 Hz 2.5 W
2.5 W
IP X4
Continuous operation with intermittent loading,
duty cycle of 10 seconds ON/30 seconds OFF
Ambient temperature:
Relative humidity:
Atmospheric pressure:
Ambient temperature:
Relative humidity:
Atmospheric pressure:
Ambient temperature:
Relative humidity:
Atmospheric pressure:
Hand piece will allow a minimum of 150 10-sec
cycles upon complete recharging.
Time to battery recharge: maximum 10 hours
Resetable fuse
Minimum 400 full recharge cycles
5 W LED
450 – 490 nm
Length
Width
Length
Width
100 grams
45 grams
Scientific Compendium
10 – 32°C.
30 – 100%
500 - 1060 hPa
-10 - +35 °C/
14 – 95 °F
30% - 80% (non-
condensing)
500 - 1060 hPa
-10 - +60 °C
14 – 140 °F
30% - 80% (non-
condensing)
500 - 1060 hPa
159 mm
28 mm
87 mm
13 mm
22 / 22
1