DENTSPLY MIDWEST Stylus 181S Series Installation, Maintenance And Operation Instructions

DENTSPLY MIDWEST Stylus 181S Series Installation, Maintenance And Operation Instructions

Standard high speed handpiece with fiber optics & push button chuck

Advertisement

Stylus
Standard
M
IDWEST
®
180S, 181S, 360S, 361S, 540S, 541S
High Speed Handpiece with Fiber Optics & Push Button Chuck

Advertisement

Table of Contents
loading

Summary of Contents for DENTSPLY MIDWEST Stylus 181S Series

  • Page 1 Stylus Standard ™ IDWEST ® 180S, 181S, 360S, 361S, 540S, 541S High Speed Handpiece with Fiber Optics & Push Button Chuck...
  • Page 3 Stylus Standard Midwest ™ ® 180S, 181S, 360S, 361S, 540S, 541S High Speed Handpiece with Fiber Optics and Push Button Chuck Installation, Maintenance and Operation Instructions...
  • Page 4 WARNINGS: Midwest ® Stylus ™ Standard High Speed Handpiece • This product is intended for use by dental professionals only. Standard Description Series SKU Ref • It is the responsibility of the Dental Healthcare Professional (DHCP) Stylus 180S 790300 Stylus Compatible with MULTIflex ®...
  • Page 5: Installation

    Air Requirements Installation The handpiece delivers designed speed and torque when operated Checking Handpiece Hose with clean, filtered, moisture-free air at the recommended operating pressure of 40 psi (2.7 Atm.) for 180S, 360S, 540S series and Make sure all tubing supplying the handpiece hose is properly 42 psi (2.9 Atm.) for 181S, 361S, 541S series.
  • Page 6 handpiece. Coupler remains Installation, continued installed on the hose. Midwest Coupler Installation NOTE: Do not attempt to remove handpiece from coupler (Applicable instructions for 180S, 360S, 540S Series) without pushing buttons at the base of coupler! Do not sterilize coupler. Screw the coupler onto the handpiece hose line.
  • Page 7: Water Supply Recommendations

    180S, 181S, 360S, 361S series and 30 psi for 540S, 541S series. The recommended operating pressure for water is 12 psi for 180S, 181S, DENTSPLY recommends the following steps between each patient 360S, 361S series and 6 psi for 540S, 541S series. If you get a...
  • Page 8 Scrub and Rinse right 1. Disconnect handpiece from coupler. 2. Push button to remove bur. DENTSPLY Professional also recommends lightly lubricating 3. Scrub and rinse handpiece under warm tap water with a soft the coupler O-rings with Midwest brush or sponge. While scrubbing and rinsing, it is best Plus Handpiece Lubricant.
  • Page 9 NOTES: Cleaning and Maintenance, continued • A KaVo MULTIflex lubricating nozzle will conveniently fit onto Midwest Plus ™ Aerosol Spray. nozzle fully into handpiece (without a bur). Cover head of handpiece • If a coupler is needed for use with Midwest Air Station, with Midwest spray guard or paper towel.
  • Page 10: Operation

    Insert handpiece (without a bur) into sterilization bag and load into Insert the coupler into the handpiece until it “clicks” into place. autoclave. (DENTSPLY Professional recommends using sterilization Check for secure connection by tugging the handpiece. To operate bags with at least one paper side.) Handpieces should be processed the handpiece, simply depress the foot control on your dental unit.
  • Page 11 Operation, continued Recommended Burs & Diamonds For: CAUTION: Never operate the handpiece under the 180S and 360S Series following conditions: • Regular Friction Grip (FG) burs 1. In the presence of a soft tissue wound. • Shaft diameter of 1.6 mm per ISO 1797-1 2.
  • Page 12 WARNING: Use of cutting instruments over .906 Operation, continued inches (23 mm) in length could possibly result in handpiece failure or personal injury due to bur Installing and Removing Burs ejection or inadequate cooling. To install a bur: Insert the bur into the handpiece until you WARNING: Do not extend burs outward from meet resistance.
  • Page 13 Midwest Dental Products • Expert Troubleshooting and Diagnosis Attn: Midwest Air Repair • Repair Service Warranty equal to the new product warranty 901 West Oakton Street Des Plaines, IL 60018-1884 For Customers Outside the United States, Contact Your DENTSPLY Representative.
  • Page 14 Parts Parts Midwest Plus Aerosol Spray Replacement o-rings, 5-Hole Coupler 500 ml. Cleaner/Lubricant 380080 2 sets 790255 Midwest Plus Nozzle Replacement o-rings, 6-Pin Coupler Nozzle for above 380085 2 sets 790256 Midwest Handpiece Air Station Replacement Bulbs for 6-Pin Coupler includes box of 12 FREE Spray Guards 380800 and 5-Hole Power Optic Tubing...
  • Page 15: Warranty

    (at the discretion of DENTSPLY Professional) and has not been Within the United States: subjected to apparent misuse, abuse or accident. All questionable,...
  • Page 16 ISO 13485:2003 Web: www.professional.dentsply.com DENTSPLY Professional Copyright 2006 DENTSPLY International A Division of DENTSPLY International Code No. 86915-0506 Printed in U.S.A. 901 West Oakton Street U.S. and International Patents Pending Des Plaines, IL 60018-1884 USA MULTIflex Lux is a registered trademark of KaVo Corporation...

Table of Contents